# Connect any Phidget sensor to Node-RED

**URL:** <https://community.tulip.co/t/connect-any-phidget-sensor-to-node-red/3033>\
**Category:** Show and Tell\
**Tags:** node-red, phidgets, sensors\
**Created:** [June 25, 2021, 7:25pm UTC](https://community.tulip.co/t/connect-any-phidget-sensor-to-node-red/3033 "2021-06-25T19:25:43Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![amisch](https://avatars.discourse-cdn.com/v4/letter/a/cab0a1/32.png) [@amisch](https://community.tulip.co/u/amisch)\
**Post date:** [April 20, 2022, 12:28pm UTC](https://community.tulip.co/t/connect-any-phidget-sensor-to-node-red/3033/9 "2022-04-20T12:28:38Z")

</div>

Ok

[This topic](https://community.tulip.co/t/low-cost-phidget-sensors-wired-directly-to-tulip-using-node-red/4378) is more suited for the USB wired connection.

Go ahead and delete the Phidgets connect node and add it back in with the `0.0.0.0:5661` IP address.

---

_[View the full topic](https://community.tulip.co/t/connect-any-phidget-sensor-to-node-red/3033)._